Clinical Outcomes and Repair Integrity After Double-Row Modified Mason-Allen Repair Technique With a Single Knot in Small to Medium Supraspinatus Tears.

Background: Various arthroscopic rotator cuff repair techniques are being used for the treatment of rotator cuff tears with the development of surgical instruments. However, retears after repair are not completely avoidable, and efforts to reduce retears remain a challenge. Purpose/Hypothesis: To introduce a new repair technique, the double-row modified Mason-Allen technique with a single knot, and to compare clinical outcomes and retear rates with the single-row modified Mason-Allen technique. It was hypothesized that this new technique would have a better clinical outcome and significantly lower retear rate than the single-row modified Mason-Allen technique. Study Design: Cohort study; Level of evidence, 3. Methods: A total of 110 patients with small- to medium-sized (<1.5 cm) full-thickness supraspinatus tears were enrolled into 2 groups, with 65 patients receiving the single-row modified Mason-Allen technique (group A) and 45 patients receiving the double-row modified Mason-Allen technique with a single knot (group B). The clinical and functional outcomes were evaluated using the American Shoulder and Elbow Surgeons (ASES) score; Disabilities of the Arm, Shoulder and Hand (DASH) score; and visual analog scale (VAS) for pain and satisfaction scores. All patients enrolled in this study were monitored for a minimum of 24 months. Magnetic resonance imaging was performed to analyze the integrity of tendons and retear at 6 months after surgery. Results: No statistically significant differences between the 2 groups were found regarding the VAS for pain, ASES, and DASH scores. However, retear was found in 9 patients (13.8%) in group A and 1 patient (2.2%) in group B. The difference in the retear rate was statistically significant between the 2 groups (P = .037). Conclusion: A significantly lower retear rate and comparable clinical outcomes were seen after the double-row modified Mason-Allen repair technique with a single knot when compared with the single-row modified Mason-Allen technique. Based on these findings, the double-row modified Mason-Allen repair technique with a single knot can be considered a surgical treatment option that can provide sufficient stability in small- to medium-sized supraspinatus tears.

Comparative Evaluation of the Efficacy of Combined Intramedullary Pinning with K-Wires Pinning in the Treatment of Fifth Metacarpal Neck Fractures versus Conventional Techniques-K-Wires Pinning and Intramedullary Pinning.

Background and Objectives: Since the neck is the weakest part of the metacarpals, the most common metacarpal fracture is a neck fracture, a type which accounts for 38% of all hand fractures. Such fractures can be fixed using a variety of conventional techniques, including intramedullary pinning and K-wire pinning. However, conventional techniques involve complications, such as angulation, stiffness, and rotational deformity. The purpose of this study was to compare the usefulness of our new technique, combined intramedullary pinning with K-wire pinning (IPKP), with those of intramedullary pinning (IP) and K-wire pinning (KP). Materials and Methods: This was a single-center, randomized controlled trial conducted between January 2005 and April 2023. A total of 158 patients with acute displaced fractures of the fifth-metacarpal neck were randomly assigned to either the IPKP group (n = 48), the KP group (n = 60), or the IP group (n = 50). We radiographically evaluated angulation and shortening in three visits: pre-operatively, post-operatively, and at a 1-year follow-up. We clinically evaluated the ranges of motion and Quick-DASH scores to assess daily living performance and the cosmetic scores, using the SBSES score, to assess patients' satisfaction with their cosmetic outcomes. Results: The IPKP group was superior to the KP group and the IP group regarding radiographical and clinical assessments at the 1-year follow-up visit. The angulation was 15.7° (±7.7) in the KP group, 17.0° (±5.9) in the IP group, and 12.6° (±2.5) in the IPKP group (p < 0.001) at the 1-year follow-up visit. The shortening was 0.9 mm (±0.3) in the KP group, 1.4 mm (±0.2) in the IP group, and 0.4 mm (±0.1) in the IPKP group (m < 0.001) at the 1-year follow-up visit. The TAM was 272.6° (±17.5) in the KP group, 271.1° (±18.0) in the IP group, and 274.1° (±14.9) in the IPKP group (p = 0.42). Four patients (6.6%) in the KP group and two patients (4%) in the IP group were reported as having stiffness, while no patients were found to have stiffness in the IPKP group. The average Quick-DASH score was 2.3 (±0.5) in the KP group, 2.5 (±0.4) in the IP group, and 1.9 (±0.4) in the IPKP group (p > 0.05). The average cosmetic score was 3.7 (±1.2) in the KP group, 3.8 (±0.9) in the IP group, and 4.7 (±0.8) in the IPKP group (p < 0.001). A complication involving nonunion occurred in one case (1.6%) in the KP group, while there were three cases (6%) of rotational deformity in the IP groups. Conclusions: With the IPKP technique, accurate reduction can be achieved to improve hand function and cosmetic outcomes.

Outcomes of bone marrow aspirate concentrate and matrix-induced chondrogenesis (BMIC) for treatment of osteochondral lesions of the talus.

BACKGROUND: To analyze the outcomes of Bone marrow aspirate concentrate and Matrix-Induced Chondrogenesis (BMIC) in Osteochondral Lesions of the Talus (OLTs). METHODS: Patients with OLTs treated with BMIC from June 2013 to July 2020 were included. Visual Analogue Scale (VAS), Foot Function Index (FFI), and Foot Ankle Outcome Score (FAOS) before treatment and at last follow-up were subjected to analysis. RESULTS: Forty-five patients were included and mean follow-up was 39.1 months (range, 13-97 months). Mean lesion size and depth were 180.7 ± 110.4 mm2 and 9.6 ± 3.7 mm, respectively. BMIC was performed without malleolar osteotomy in 36 patients (80%) and bone graft was performed in 42 (93.3%). VAS, FFI, and FAOS improved significantly. No complication occurred and no revision was required. CONCLUSIONS: The BMIC procedure is feasible and should be considered a viable treatment option for OLTs associated with large subchondral bone defects.

Global Sagittal Alignment and Clinical Outcomes after 1-3 Short-Segment Lumbar Fusion in Degenerative Spinal Diseases.

STUDY DESIGN: Level III retrospective study. PURPOSE: We investigated the impact of short-segment lumbar fusion on the restoration of global sagittal alignment and the correlations between spino-pelvic parameters and clinical outcomes. OVERVIEW OF LITERATURE: Sagittal imbalance leads to energy consumption and pain in maintaining a standing position. For adult spinal deformity, it is critical to create optimal lumbar lordosis (LL) in order to achieve restoration of sagittal imbalance. However, surgeons do not pay attention to correcting LL in short-segment lumbar fusion. METHODS: A total of 69 patients with transforaminal lumbar interbody fusion (TLIF) for degenerative spinal disease were evaluated with a minimum 2-year follow-up. All patients underwent TLIF with hyper-lordotic angle cages to achieve higher LL. Radiological spino-pelvic parameters including sagittal vertical axis (SVA) and clinical outcomes using the Oswestry Disability Index (ODI) and Numeric Rating Scale (NRS) were evaluated. RESULTS: The average LL was 35.8°±9.9° before surgery, 42.3°±9.3° 1 year after surgery, and 40.3°±10.2° 2 years after surgery (p <0.01). The average SVA was 43.1±6.2 mm before surgery, 21.2±4.9 mm 1 year after surgery, and 34.0±4.7 mm 2 years after surgery (p <0.01). The average LL and SVA improved in two- or three-segment fusion, but not in one-segment fusion. The correlation between ΔLL and ΔSVA was significant in all segment fusions. The correlation between ΔLL and ΔSVA was more significant at the L4-5 and L5-S1 segments than at L3-4. ODI was significantly correlated with SVA (p <0.05). NRS showed no correlation with the radiological parameters. CONCLUSIONS: Two- or three-segment lumbar fusion using hyper-lordotic angle cages improved LL and SVA. A significant correlation between the correction of LL and SVA was found. Higher correction of LL using hyper-lordotic angle cages is thus recommended in short-segment lumbar fusion, since postoperative improvements of SVA significantly affect clinical outcomes.

Clinical and Radiological Outcomes of Rectangular Tapered Cementless Stem According to Proximal Femoral Geometry in Elderly Asian Patients.

PURPOSE: A retrospective analysis of mid- to long-term clinical and radiological outcomes of Korean patients over 60 years of age who underwent hip arthroplasty using a cementless rectangular tapered stem according to Dorr proximal femur geography. MATERIALS AND METHODS: From January 2007 to December 2013, 107 patients (112 hips) underwent hip arthroplasty using the C2 stem. The mean age of patients was 77.4 years (range, 60-91 years) and the mean follow-up duration was 91.1 months (range, 60-116 months). All patients were evaluated clinically and radiologically with special attention to Dorr femoral bone classification, implant fixation, radiolucent line (RLL), and thigh pain. RESULTS: All implants demonstrated radiographic evidence of stable fixation by bone ingrowth without any change in position. The mean Harris hip score improved from 65.5±16.0 (preoperative) to 90.5±15.9 (final follow-up) (P<0.001). Incidence of RLLs, stress shielding, and thigh pain was highest in patients with Dorr type A (RLL, P=0.021; stress shielding, P=0.030; thigh pain, P<0.001). One stem revision was performed due to deep infection. The Kaplan-Meier survival rate of the femoral stem was 97.6%. CONCLUSION: The overall survival rate of the C2 stems was greater than 97%; there were no significant differences in survival of the C2 stem according to the Dorr classification. The incidences of RLL of thigh pain and RLL were significantly different among Dorr classifications and (highest in patients with Dorr type A).

Prognostic Factors and Clinical Outcomes after Treatment of Periprosthetic Femoral Fractures Using a Cable-plate.

PURPOSE: To analyze prognostic factors for the treatment of periprosthetic femoral fractures (PFFs) using the cable-plate construct. MATERIALS AND METHODS: A retrospective review of a consecutive series of 41 PFFs treated by osteosynthesis using the cable-plate system. The mean age of patients was 67.3±12.1 years (range, 42-86 years) and the mean follow-up period was 31.5±11.6 months (range, 12-58 months). Fresh frozen cortical strut allografts were leveraged in three cases for additional stability. Prognostic factors that may potentially affect clinical outcomes were analyzed. RESULTS: At the time of final follow-up, fracture union was obtained in 29 hips (70.7%; Group I) after an average of 13.5 weeks (range, 12-24 weeks). Healing failure after surgical treatment was observed in 12 cases (29.3%; Group II), including delayed union (n=10) cases and nonunion (n=2). Factors significantly associated with fracture union included fracture pattern (P=0.040), plate overlap percentage to stem length (P<0.001) and T-score at the preoperative bone mineral density (P=0.011). Transverse-type fractures around or just distal to a well-fixed femoral stem were observed in six cases (50.0%) of Group II. CONCLUSION: The cable-plate osteosynthesis of PFFs should be performed with caution in transverse-type fractures or in cases with severe osteoporosis. Fixation with sufficient plate overlap to stem length may be critical to prevent healing failure.

Clinical outcomes and survival rate of cementless modular distal fixation femoral stem for revision hip arthroplasty: A minimum 6-year follow-up.

PURPOSE: Revision hip arthroplasty is a very challenging procedure. Use of a modular distal fixation stem is one of the available options for revision arthroplasty in patients with proximal femoral bone deficiency. The purpose of this study was to evaluate mid- to long-term outcomes of cementless modular distal fixation femoral stem implantation in revision hip surgery. METHODS: Clinical and radiological findings, complications, and stem survival rate were analyzed for 46 patients (48 hips) who underwent revision hip arthroplasty using a cementless modular distal fixation femoral stem. The mean patient age was 58.8 years (range 31-82 years) and the mean follow-up period was 95 months (72-122 months). The preoperative diagnoses were aseptic loosening (36 hips), infection (4 hips), ceramic fracture (4 hips), and femoral periprosthetic fracture (4 hips). RESULTS: The mean Harris hip score improved from 56.6 preoperatively to 88.2 postoperatively at the last follow-up. All hips showed stable osteointegration and firm fixation. Complications involved four hips (8.3%); there was one case each of periprosthetic fracture, delayed union of osteotomy site, femoral perforation, and infection. One stem re-revision was performed for deep infection of the femoral side. The Kaplan-Meier survival rate was 97.6% at the final follow-up. CONCLUSION: Revision hip arthroplasty using a cementless modular distal fixation femoral stem showed satisfactory initial firm fixation and mid- to long-term survival rate. Complications can be minimized by careful surgical planning and meticulous procedure.

Long-term clinical outcome of two-stage revision surgery for infected hip arthroplasty using cement spacer: Culture negative versus culture positive.

INTRODUCTION: Periprosthetic joint infection (PJI) is a terrible complication after hip arthroplasty. Clinical feature of culture-negative PJI (CN-PJI) has not been well studied till now. In our study, we retrospectively analyzed long-term clinical results after two-stage revision arthroplasty using an antibiotic-impregnated cement spacer for CN-PJI. The purpose of this study is to investigate the clinical features and prognosis of CN-PJI after hip arthroplasty and to compare these with those of culture-positive PJI (CP-PJI). METHODS: We retrospectively reviewed 15 CN-PJI cases and 70 CP-PJI cases following hip arthroplasty. The average follow-up period was 7.4 years (5-11.7 years). The demographics, laboratory findings, the time interval between antibiotic-impregnated cement spacer insertion and revision arthroplasty, and recurrence of infection were analyzed. RESULTS: The CN-PJI group showed a significantly higher incidence of prior antibiotic use ( p = 0.004) and lower serum C-reactive protein (CRP) level ( p = 0.001) than the CP-PJI group. Normalized time interval of CRP level in CN-PJI was shorter than that of CP-PJI group. The mean interval time for two-stage exchange arthroplasty was also significantly lower ( p = 0.049) in the CN-PJI group than the CP-PJI group. There was no case of treatment failure or major complication in CN-PJI group. CONCLUSION: The CN-PJI group after total hip arthroplasty could be treated successfully by two-stage exchange arthroplasty without any complications. Clinical course and prognosis of CN-PJI group was also better compared with that of CP-PJI group. Therefore, culture negativity of PJI cannot be always a poor prognostic factor for the treatment.